Aiwa CX-JE3, Service Manual

Page: 9 / 68

7
CX-JE3
7
Buttons with the same or similar names with the main unit
basically have the same function.
1
POWER
2
1-0/10, +10
CD: selects a CD track of the specified number.
Tuner: tunes in to the station with the specified preset
number.
The numbered buttons take on these functions below when pressed
with SHIFT held down:
EDIT
Enters AI Edit Recording or Programmed Edit Recording
mode when pressed in stop mode.
BAND
Selects Tuner function and the radio band.
TAPE A/B
SPECTRUM
Changes the spectrum analyzer display.
TUNER MODE
Switches between stereo or monaural FM reception.
3
r
,
t
CD: selects a track.
Tuner: selects a preset station.
Tape: specifies tape length.
BASS and TREBLE: adjusts the level.
Clock and Timer: sets the time.
4
ALBUM
M
,
N
Selects a previous album or a succeeding album.
5
PLAY MODE
Selects Shuffle or Programmed playback in CD function.
REPEAT
Enters CD repeat playback mode.
ENTER
6
CLOCK/TIMER/SET
Enters timer setting mode.
CLOCK/TIMER/SELECT
Selects timer playback, timer recording or timer off.
7
DISPLAY
8
SHIFT
Hold down when pressing a numbered button to change
its function to that printed above the number.
e.g.)
"Press SHIFT+BAND on the remote" indicates "Hold
down SHIFT and press '2' (BAND)". Doing so makes you
be able to select Tuner function and the radio band.
9
FUNCTION
Switches the active function among CD, TAPE, TUNER
and VIDEO (AUX or TV).
0
DISC SKIP
Select a disc.
!
c
/
d
When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.
s
CD and Tape: stops playback.
f
,
g
CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
a
CD and Tape: pauses playback.
@
SLEEP
Switches the sleep-timer on/off and selects the duration.
#
VOLUME (
+
,
-
)
Adjusts the volume.
$
SOUND
Selects BASS or TREBLE setting mode
CLEAR
Clears a track of the CD programmed playback and a
Radio preset station.
Note
The button not explained above ( KARAOKE ) does not
operate for this unit.
Remote control
Setting the clock
Use the remote.
1
Press CLOCK/TIMER/SET.
Go to step 3 when the time appears and the 'hour' flashes.
2 Press
r
or
t
repeatedly until " CLOCK
SET " appears in the display and then press
ENTER.
3 Press r or t repeatedly to set the hour
and then press ENTER.
4
Press
r
or
t
repeatedly to set the minute
and then press ENTER.
The time display stops flashing and the clock starts from
00 seconds.
•MULTI JOG is also available in place of
r
or
t
.
To display the time
Press DISPLAY on the remote. The time will be displayed for
6 seconds.
If " - -:- - " appears when the unit is turned off
There has been a power interruption. Re-set the clock.