-31-
ELECTRICAL ADJUSTMENT-2/4 (U MODEL)
< TUNER SECTION >
1. FM VT Check
Settings:
• Test point: TP4
Method:
Set to FM 87.5MHz, 108.0MHz and check that the test
point is more than 0.4V (87.5MHz) and less than 9.0V
(108.0MHz).
2. FM TARCKING check
Settings:
• Test point: TP8 (Lch)
TP9 (Rch)
Method:
Set to FM 98.0MHz and check that the test point is less
than 9.0dBµV.
3. DC Balance Adjustment
Settings:
• Test point: TP5, TP6
• Adjustment location: L771
• Input level: 50dBµV
Method:
Set to FM 83.0MHz, 98.0MHz and adjust L771 so that
the voltage between TP5 and TP6 becomes 0V±0.04V.
4. VT AM check
Settings:
• Test point: TP4
Method:
Set to AM 1710kHz, 530kHz and check that the test
point is more than 0.6V (530kHz) and less than 8.5V
(1710kHz) .
5. AM IF Adjustment
Settings:
• Test point: TP8 (Lch)
TP9 (Rch)
• Adjustment location: L772
Method:
Set to AM 999kHz, 1000kHz and adjust L772 so that
the Wave to maximum.
6. AM Tracking Adjustment
Settings:
• Test point: TP8 (Lch)
TP9 (Rch)
• Adjustment location: L981
Method:
Set to AM 999kHz, 1000kHz and adjust L981 so that
the test point is less than 58dBµ, lock it with
PARAPFIN.
< DECK SECTION >
7. Tape speed Adjustment
Settings:
• Test tape: TTA-100
• Test point: PHONES JACK (J201)
• Adjustment location: SFR1
Method:
Play back the test tape and adjust so that the output
frequency is 3000Hz ±30Hz.
8. Azimuth Adjustment
Settings:
• Test tape: TTA-320
• Test point: PHONES JACK (J201)
• Adjustment location: Azimuth adjustment screw
Method:
Play back the test tape and adjust so that the output is
maximum.
< CD SECTION >
9. CD Focus Bias Adjustment
Settings:
• Test Disc : TCD-782
• Test point: TP1
+
Vref
-
• Adjustment location: SFR530
Method:
Play back the test CD track 2 and adjust so that the
output level is DC 0mV±10mV.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
