Aiwa ADC-V107, Service Manual, Page: 2 / 8

1. FFC connector removal
Lift the connector lock upward at an angle of 90 degree to remove the FFC connector.
2. How to use repairing jig
For repair, use the jig kit specified as follows.
Parts Name Parts Number
10-roll use JIG-ADC-EX106 SV-J00-090-010
The kit includes the following 5 tools.
1. FFC (26P/25cm) 1pcs
2. P.W.B. FLEX 1pcs
3. P.W.B. JIG 1pcs
4. TRANSISTOR (2SD2395) 1pcs
5. P.W.B. KEY 1pcs
1. Using jig
1. CABI BOTTOM removal
1) Remove the CABI BOTTOM. VTT+2.6-6 B 4 pcs
2. P.W.B. VIDEO removal (fig-1)
1) Remove the screws and release the hooks, and then take out P.W.B. VIDEO. 2 hooks
VT+2.6-4B 2 pcs
2) Remove the PWB FLEX from the main unit. U+2.6-4 3 pcs
U+3-10 1 pcs
3. P.W.B. MAIN removal
1) Remove the soldered parts from each terminal of Transistor Q301 (2SD2395).
2) Remove the 2 motor wires (BLU/WHT).SD
3) Remove the 2 wires (BLK/BRN) from P.W.B. Sensor (PD701).
4) Remove the P.W.B. MAIN from the main unit.
V+2-3 2 pcs
V+2-4 2 pcs
HLD P.W.B 2 pcs
5) Remove the LED (LED701) from P.W.B. MAIN. GL380
6) Remove the Sensor (PS701) SENR GP1S94
from P.W.B. MAIN.
4. Jig assembly
1) Attach P.W.B. JIG to the unit with screws. (fig-2)
>
fig-1
fig-2
SERVICE JIG AND TOOLS
– 2 –