Aivee Edition one HD, User Manual

Page: 9 / 10

AIVEE Edition one HD
EDITION ONE HD-FR-REVA-(04_2019)
9
CONVERSION
The Aivee Edition one HD rear hubs are compatible with both Shimano and
Sram standards with two freewheel body kits available. The conversion between all
of these standards has been designed to simplify this task.
To change the freewheel body, remove an axle end mounted on the hub by
pulling it. Remove the cassette body by pulling it too. Assemble the spindle and the
new freewheel body with the hub body.
Then, put the axle end until it bottoms out.
MAINTENANCE
Edition one HD hubs are designed to resist. With a little of maintenance, they
will be more efficient. When you are accumulating muddy rides, don’t hesitate to
clean your hub.
Front Hub
To clean the front hub, you must remove easily axle ends. Then, remove the
mud and the dust that can bother the bearing functioning. Grease elements and
assemble the hub.
Rear Hub
To clean the rear hub, remove an axle. Remove the cassette body by pulling
it. Then clean the ratchet and pawls if needed. Lubricate with oil the ratchet and
pawls (viscosity: more than 150 cSt), assemble the cassette body into the hub body.
Then put adapted axle ends.