LogiScan-2000 Operating Manual ___________________________________________
Edition 05.12.2017 _____________________________________________________ aitronic
6
4. Battery
Charging the Battery
This is preferably done with the Magnetic Charging Adapter. The max. Charging
time with fully discharged battery is 13 hours.
To maintain the battery charge, charging can be done via USB cable. However, full
charging via USB cable takes considerably longer than charging with the Magnetic
Charging Adapter, since the charging current is much lower.
Deeply discharged Batteries
Symptoms
: A device with a deeply discharged battery can no longer be
switched on. After the AC adapter has been plugged in or the device has been
put into the cradle, the flash symbol can flash for a short time. Until then the
red charge LED at the top left of the device can go up to 10 minutes.
Leave the device connected in the cradle or the AC adapter!
Observe the notes in "Charging the Battery".
Thus, a deep discharge of the battery can be avoided:
Charge the batteries regularly. For intensive use should be loaded daily.
Charge the battery as soon as possible after you receive the prompt from the
device.
If a device is not used for more than 2 days, turn it off as follows: Press and
hold the power button on the side of the device, and then press "Turn off" in
the menu that appears.