AITech ProPC/TV Wireless User Manual Download Page 3

 

2

1. Introduction   

Overview 
 

AITech ProPC/TV Wireless 

is a wireless PC-to-TV digital scan converter system capable of transmitting audio/video signals through walls up to 100 feet away. 

This 2.4 GHz transmitter/receiver scan converter system enables you to transmit audio and video from your PC, VCR, DVD player or anything else with a 
composite video output, and view everything on a TV monitor.   

 

 
AITech

 used advanced wireless transmission technology in developing the 

ProPC/TV Wireless

, which is highly resistant to external interference and can deliver 

clear and sharp images and sound over distances of up to 100 feet. Universal applications are possible, as the 

ProPC/TV Wireless

 is capable of worldwide 

NTSC and PAL television formats. 
 

Key Features   

 

 

2.4 GHz wireless Transmitter and Receiver 

 

4 user-selectable channels increase flexibility and        performance

 

 

Omni-directional built-in dipole A/V antennas

 

 

The 

ProPC/TV Wireless

 supports NTSC and PAL worldwide television formats 

 

Converts VGA to Video! Transmitter connects to VGA card and sound card of any PC, and wirelessly transmits video/audio signals to receiver. 

 

Video and stereo audio transmission 

 

Resolution and refresh rate input up to 2048x1536 and 150Hz, respectively 

 

Clear and sharp video images and stereo audio quality output from the receiver 

 

Wireless transmission up to 200 feet in open areas, and up to 100 feet inside most homes, schools and offices, depending on the construction of the materials 

between the transmitter and receiver. 

 

Compact size - antennas are embedded in the housing   

 

No software required 

 

FCC certified 

 

Compatible with camcorders and CMOS cameras 

 

Receiver wirelessly receives VGA/Video/audio signals from transmitter and output connects to TV, LCD TV monitor, VCR, Digital Video recorder, video 

projector, speaker, or any device with video/audio input.     

 
Multiple-operation modes:   

 

One-to-One (1 transmitter to 1 receiver)   

 

One-to-Multiple (1 transmitter to multiple receivers) One Transmitter can broadcast to any number of Receivers that are set to the same channel. Requires 

additional Receivers, sold separately. 

 

Multiple-to-Multiple (multiple transmitters to multiple receivers) You may use up to four pairs of 

ProPC/TV Wireless

 simultaneously in the same area, 

without interfering with each other, by setting each pair to operate on a different channel. 

 
 
 

Summary of Contents for ProPC/TV Wireless














Reviews: