Aitchison SEEDMATIC 40/4124 E Series, Manual, Page: 29 / 59

28
REAR INSPECTION PANELS REMOVED
GENERAL MAINTENANCE
Machines Grease Points:

1 per Disc Coulter Pod assembly.

Depth Leg assembly

Seed Shaft drive.

Fertiliser Shaft drive.

Rear Transport assembly.
Greasing location points are labelled on the drill with the “Grease” sticker (shown
above). Chains should be kept lubricated and should be removed at least once each
season and thoroughly cleaned and oiled.
CARE OF THE SPONGE PADS
The sponge pads are easily accessible for maintenance and cleaning by removing the
inspection panel at the bottom of the seed hopper. The seed hopper should be cleaned
thoroughly after use as vermin show little respect for a sponge pad if there is seed
behind it.