AIT HDi 11K400/230 KB, Use And Maintenance Manual

Page: 18 / 34

Use and maintenance manual
Page
53
of 137
13. Maintenance
•
Machine maintenance must be carried out by qualified, authorised personnel who are aware
of its operating procedures.
•
Never perform any cleaning, lubrication or maintenance with the machine running.
•
Before any maintenance work, set the main switch to "0" to cut off power, unplug it from the
mains to prevent electrical shock or other hazards resulting from mishandling.
•
Never wear rings, watches, jewellery, loose or dangling clothing such as ties, torn garments,
scarves, unbuttoned jackets or jackets that zip open that can get tangled during work.
•
It is instead advisable to use suitable clothes for accident prevention, for example: non-slip
shoes, anti-noise headphones, goggles, appropriate gloves, etc.
•
Never use gasoline or flammable solvents to clean the machine. Use water and, if necessary,
commercial non-toxic solvents.
•
After operations have been completed, always refit any protections that were removed before
re-starting the machine.
13.1 Preventive maintenance
Meticulous inspections carried out regularly are necessary in order to detect
and eliminate faults quickly before they can cause any major damage.
Any time you need to use the
INDUCTOR HDi series
, first check the
efficiency of safety devices, the conditions of connections and if there are any
anomalies by performing some no-load tests and on ferrous scrap material.
Check daily for wear and legibility of warning signs.
13.2 Routine maintenance
Machine operating safety can only be guaranteed if repairs are performed using only original or
however approved replacement parts and if maintenance instructions are followed correctly.
At the end of each use, with the machine disconnected from the electrical mains, proceed with a
general cleaning of the machine, quickly removing dust or dirt deposits in general as this could
reduce ventilation and alter machine function and durability.
Before each use, verify the functionality of control devices, safety devices and the conditions of
electrical connecting cables.