Instruction manual (informations for user)
EN
Working protective gloves - 600146
Norm EN388:2003 - mechanical risks (higher level = higher protection factor)
0-4
0-5
0-4
0-4
Abrasion resistance
Blade cut resistance
Tear resistance
Puncture resistance
level 2
level 1
level 2
level 1
Norm EN420:2003+A1:2009
0-5
Dexterity
Ø 5mm
level 5
PH detection
meets requirements, is higher than 3,5 and lower than 9,5
Chromium VI
lower than detection limit
Product and it´s purpose: Working protective
gloves
made from polyester knitted fabric and latex. These
gloves protect against dirt, minimal mechanical risks like scrapes, cuts, more like protection against hot
objects, but it does not provide protection against temperatures higher than 50°C. The gloves are not
designed for welding, to protect against chemical substances, or ionizing radiation. The material used
for the production of the gloves is not harmfull to user´s health, but it contains also latex, so allergic
reaction can not be excluded in conjunction with hypersensitive skin. If the gloves cause the reaction, pls
stop using them immediatelly.
Maintenance and cleaning: Clean the gloves after use, it prolongs the lifetime. Dry cleaning
recommended with a soft brush or a wet cloth. Do not clean chemically, do not wash, do not dry in a dryer,
do not iron! Change the product for the new one if it is partially worn through, cut through, burned through
or strongly contamined.
Storing: Gloves should be stored at a room temperature, on a dry place, away from the direct sunlight.
Please note: Check the gloves before and after every use, so they are not worn through or the protection
level is not reduced. Do not use for manipulation with fire, hot objects, toxic chemicals or greasy objects.
Not resistant to soaking. The gloves should not be used in places where there is a risk of catching into a
moving parts of machinery.
Disposal: Used gloves may be contamined and should be disposed in compliance with local regulations.
Unused gloves can be disposed with household waste.
EN420:2003+A1:2009
EN388:2003
Category I
Protects against minimal risks only.
Available sizes: 8,9
Read the instructions
carefully!
Producer: Qingdao Aisenlin Industry and Trade Co. Ltd., Jiaoxi, Jiaozhou, Qingdao, China
Importer: T.T. Production, Česká republika
