American Industrial Systems – Atom™ Z510 Fanless Touch Panel PC User Guide
Page 13
Touch Screen Solution
6.1 Introduction to Resistive Touch Screen
The resistive touchscreens use a glass panel with a uniform resistive coating. A thick polyester coversheet
is tightly suspended over the top of the glass, separated by small, transparent insulating dots. The
coversheet has a hard, durable coating on the outer side and a conductive coating on the inner side.
When the screen is touched, the conductive coating makes electrical contact with the coating on the glass.
The voltages produced are the analog representation of the position touched. The controller digitizes these
voltages and transmits them to the computer for processing. The technology utilizes the bottom substrate
for both X and Y-axis measurements. The flexible coversheet acts only as a voltage-measuring probe.
This means the touchscreen will continue working properly even with non-uniformity in the cover sheet's
conductive coating. The result is an accurate, durable and reliable touchscreen that offers drift free
operation. The touchscreens are sealed against contamination and moisture. The coversheet is sealed to
the glass substrate with an industrial grade caulk. This prevents wicking of fluid between the coversheet
and glass. Also, the touchscreens are not air vented, thereby preventing fluid ingress through an air vent.
Brief Specifications:
