Airxcel maxxfan 4000KI Installation Instructions And Operating Manual Download Page 4

AIRXCEL, INC.  - RV PRODUCTS DIVISION / 

MAXXAIR Ventilation Solutions

 warrants to 

be free of manufacturing defects, regardless 

of ownership for a period of one (1) year from 

the original date of purchase.  

You must keep 

your original sales receipt.

   This 

Limited 

Warranty

  does  not  include  “Acts  of  God,” 

failure  due  to  misuse,  improper  installation 

or accidental / incidental damages.   Please 

call your AIRXCEL / MAXXAIR Distributor if 

you have any questions or need assistance.   

Please have your original sales receipt 

and MAXXFAN Serial Number readily 

available.

    This  limited  warranty  does  not 

cover labor or any freight costs for the return 

of the product to or from AIRXCEL, INC.  or 

costs associated with installation, removal or 

reinstallation of the product.

For WARRANTY INFORMATION on products purchased in Australia or New Zealand,

please visit www.coastrv.com.au • www.coastrv.co.nz

The Serial Number for your MAXXFAN is located on the fan control plate under the round 

insect screen frame.  Actual location may differ from image shown.  Reference your 

operating guide.   Rotate the four retaining knobs 180° and remove the screen to view.   

DO NOT OPERATE the MAXXFAN with the screen removed.

CAUTIONS AND CARE OF YOUR MAXXFAN

®

This product has been manufactured using prime UV stabilized Polymers for maximum 

toughness and durability.  However, the use of caustic or solvent based chemicals can 

cause cracking and product failure.

PLEASE CLEAN ALL PARTS WITH MILD SOAP AND WATER ONLY.

Do not use Petroleum Containing Additives or Solvent Based Products on any of the 

MAXXFAN’s components or its corrosion resistant hardware.

LISTED BELOW ARE SOME KNOWN CHEMICAL PRODUCTS TO BE 

AWARE OF:

NON COMPATIBLE CHEMICALS - DO NOT USE THESE:

Ketones, Esters, Acetone or other like solvents, Halogenated Hydrocarbons, 

Amines, Aromatic Hydrocarbons, (Loctite Formulas), or any products containing 

references to: chemicals that are not to be used on plastics.

GENERALLY COMPATIBLE (But should be used in low concentration 

where possible)

Acids, Alcohol, Alkalis, Aliphatic Hydrocarbons, Mild Soap Solution (avoid strong 

Alkaline Material), Silicone Oil or Greases (avoid those containing Aromatic 

Hydrocarbons or other additives).   Review the contents of your cleaning materials 

carefully.

For additional information regarding your 

NEW MAXXFAN 

Plus

, please refer to the 

INFORMATION AND OPERATING GUIDES for your particular model on the following pages.

SERIAL NUMBER

RETAINING KNOB

MAXXFAN

®

 1 YEAR LIMITED WARRANTY

Summary of Contents for maxxfan 4000KI









Reviews: