Mode
Call
Operation
1
Fan Low
No
GL-Fan Low (Gray) energized
2
Fan Hi
No
GH-Fan High (Green) energized
3
Cool On
High
No
GH-Fan High (Green) energized
4
Cool On
High
Yes
GH-Fan High (Green) energized,
Y-Compressor (Yellow) energized
5
Cool On Low
No
GL-Fan Low (Gray) energized
6
Cool On Low
Yes
GL-Fan Low (Gray), Y-Compressor (Yellow)
energized
7
Cool Auto
Low
No
No function occurs
8
Cool Auto
Low
Yes
GL-Fan Low (Gray) energized,
Y-Compressor (Yellow) energized
9
Cool Auto
High
No
No function occurs
8
Cool Auto
High
Yes
GH-Fan High (Green), Y-Compressor (Yel-
low) energized
9
Heat Gas
No
No function occurs
10
Heat Gas
Yes
W-Furnace (White) energized
Operation Chart
The chart below shows the system functions with both COOL ONLY and
HEAT/COOL RVP thermostats. After the entire air conditioning and heating
system is installed, check each position’s function. The Cool Only thermostat
will not have heat functions.
Pairing additional thermostats
1. Using the
RV Climate app.
2. Slide screen to the left (last screen).
3. Select “
PAIR NEW THERMOSTAT”.
4. On the thermostat, Hold the Up and Down buttons simultaneously to enter
pair mode.
5. When prompted, enter the 6 digit ID from the thermostat and select “
PAIR”.
6. Once connected the thermostat will revert to the main screen.
7. Slide screen to the left (2nd screen).
8. Press .
9. Select “
ZONE NAME”.
10. Assign a name or description to the thermostat (max. of 7 characters).
11. Select “
SET” to save the assigned name or description.
Note: A maximum of 3 units may be added to an individual phone.
Pairing a previously paired thermostat
1. Using the
RV Climate app select “PAIR NEW THERMOSTAT”.
2. On the thermostat, Hold the Up and Down buttons simultaneously to enter
pair mode.
3. Thermostat will automatically pair.
Note: If thermostat doesn’t pair automatically, when prompted enter the 6
digit ID from the thermostat and select “
PAIR
”.
4. Once pairing is complete, press the thermostat’s mode button to return to
the main screen.
ZONE NAME: Assigns a name or
description to the
thermostat (maximum of 7
characters).
THERMOSTAT ID: Displays thermostat’s
6 digit ID
FUNCTIONS: Displays available modes.
SET: Saves assigned zone name/
description.
CANCEL: Reverts to main screen.
REMOVE THERMOSTAT: Removes
thermostat from the
RV Climate app.
Controlling the
thermostat via RV
Climate app
1. Slide screen to the left (2nd screen).
2. Tap the icon displaying the current
settings [
Kitchen 75 FAN HIGH].
3. Select the desired temperature/mode.
4. Press “
SET”.
Removing a previously paired thermostat
1. Using the
RV Climate app, slide screen to the left (2nd screen).
2.
Press .
3. On the following page select “
REMOVE THERMOSTAT” and press “OK”.
Details (2nd Screen)
Button Functions
Note: Hold mode button down for 5 seconds. The thermostat will change
from fahrenheit to celsius or celsius to fahrenheit. The backlight will
turn off after five seconds.
UP – Wake thermostat and increase temperature
DOWN – Wake thermostat and decrease temperature
MODE – Wake thermostat, change mode
RV Products
A Division of Airxcel, Inc.
P.O. Box 4020, Wichita, KS 67204
www.Airxcel.com
LIAF252
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
Contains FCC ID: WAP4110