4
CAUTION: Risk of severe burn.
Do not touch the engine, exhaust pipes, or any engine component until cool.
Do not remove radiator cap when engine is hot. Contents are hot and under pressure.
CAUTION: Moving parts can cause injury.
Keep hands, hair, loose clothing, and tools away from moving parts.
Keep all panels, covers, and guards closed and securely fastened during operation.
Prior to servicing, disconnect negative (-) cable from battery.
CAUTION: Electricity can cause injury or death.
Before using this equipment, carefully read, understand, and observe all instructions in this
manual and the engine manual.
Before using this equipment for the first time, visually inspect the unit for loose or missing parts
and damage that may have occurred in shipment.
This equipment should not be operated by persons under 18 years of age.
ALWAYS wear appropriate protective clothing, shoes, and other protective devices, as required
by the job.
ALWAYS wear appropriate eye, respiratory, and hearing protection.
Never operate this equipment when not feeling well due to fatigue, illness, or medication.
Never operate this equipment under the influence of drugs or alcohol.
When fueling electric-start engines, do not touch battery cables or posts to a gasoline supply can.
Before operating know the location of the nearest fire extinguisher, first-aid kit, and emergency
telephone.
Keep a fire extinguisher nearby and know its proper use. For more information, consult your local
fire department.
Store fuel only in approved containers and in well ventilated area. Exhaust fumes are poisonous if
inhaled.
Be sure the welder/generator is well ventilated on all four sides.
Do not operate this equipment in an enclosed area, such as a recreational vehicle, marine
vehicle, under the hood of a car or truck, or inside a truck or van with only the rear doors open. All
warranties are voided if unit is operated in such an area.
Keep welder/generator and surrounding areas clean. Remove oily rags and other materials that
could create a fire hazard.
NEVER use the welder/generator with a cover over the unit. The welder/generator must be in an
open environment.
NEVER service welder/generator or its components while welder/generator is running. Do not
perform service or maintenance while welder/generator is hot.
Only a qualified technician should perform repairs on this equipment, including the installation of
parts and accessories.
Use ONLY accessories or attachments that are recommended by the manufacturer.
Unauthorized equipment modifications will void all warranties.
