2
When working on this equipment avoid hot mufflers, exhaust manifolds and engine
parts which can cause severe burns. Installing and wiring a home standby generator is
not a do it yourself project. Consult a qualified licensed electrician or contractor.
This installation must comply with all national state providence and local codes. Do not
connect a generator to a home building except through an approved disconnect switch.
When working around engines use noise suppression equipment and wear protective
devices as necessary. Excessive noise is not only tiring, but continual exposure can lead
to loss of hearing.
Keep you neighbours in mind when noise level is high. Keep generator and surrounding
areas clean.
Remove oily rags and other material that create potential fire hazard. Consult the local
fire department.
Extinguishers rated ABC by the NFPA are appropriate for all applications. Consult the
local fire department.
Keep Extinguisher properly maintained and be familiar with its proper care. The
manufacturer recommends that all service including the installation or replacement of
service parts be performed only by a qualified electrical service person. Use only factory
approved repair parts.
Do not operate this unit in an enclosed compartment such as found in recreational
vehicles or inside box trucks with only the rear open door. All warranties are voided if
the unit is operated in any of the previously mentioned enclosures. Operate only
outside in a well ventilated area.
