6167 DON MURIE ST., NIAGAR A FALLS, ON L2G 0B1 |
TF:
1.866.282.2026 |
E:
ORDERDESK@AIR WOOD.C A
AIRWOOD.C A
2
STEP 6
Wood vents, like hardwood floor have natural colour variation.
For a smooth installation that looks aesthetically pleasing it’s
best to hand select and feather, like coloured flooring planks
around the vent.
STEP 7
On a table saw or chop saw cut and fit your hardwood flooring
so that it fits tight and flush to the frame of the vent. Do not
leave a gap, the frame should fit tight to the edge of your
hardwood flooring.
STEP 8
Insert the vent assembly into the frame. Adjust the damper to
your preferred airflow output (some products do not come with
a damper).
Wood Vent
STEP 4
Carefully making sure the frame has not shifted, use a #6
finishing nail to attach one corner of the frame to the sub-floor.
Use a nail set to drive the finishing nail into the recessed wood.
Avoid using a mallet or hammer to directly drive the finishing
nail into place as this can damage the rabbeted edge of the
wood frame.
STEP 5
Repeat step 4 on each corner so that you have two nails per
side inside the rabbeted edge of the frame firmly securing the
frame to the sub-floor.
