TIMER OPERATING MODES
II. TIMER OFF
This mode enables you to set the stop time of
operation. Press the TIMER button (11) till the
OFF sign blinks. Time can be adjusted using
up and down buttons (5) and (6) respectively.
Press SET button(12) to activate the Timer.
Example
: Operation stops at 18:00
I. TIMER ON
This mode enables you to set a start time.
Press TIMER button (11) till the ON sign
blinks. Start time can be adjusted using up and
down buttons (5) and (6) respectively. Press
SET button(12) to activate the Timer.
Example:
Operation is restored at 10:30
III. TIMER ON AND OFF
This mode enables you to set the start and
stop time of operation. Press the TIMER
button (11) till the OFF sign blinks. By
pressing again the ON sign blinks. Time can
be adjusted by using the up and down
buttons (5) and (6), respectively. Press SET
button (12) to activate the timer.
Example:
Operation is restored at 10:30 and
stops at 18:00
IV. CLEAR
Use this mode to cancel timer operation.
Press TIMER button (11), timer operation will
terminate and the LCD display will be cleared
for each timer mode.
Note
: If timer button (11) is selected and
neither time adjust, SET, or CLEAR buttons
are pressed within 15 seconds, the timer
operation will be cancelled and the last set-
ROOM TEMPERATURE DISPLAY
By pressing on ROOM temperature, button (16), the measured room
temperature and the room temperature sign will be displayed.
To cancel the ROOM Temperature display press on one of the following:
Press again on ROOM temperature button (16).
Change of MODE button (2)
Note:
Room temperature range is between 0°C and 36°C in 1°C increments.
Display should show "HI" or "LOW" to represent temperature that is above
36°C or below 2°C.
TIMER OPERATION
Press TIMER select button (11) to activate the timed operation mode. Each time the TIMER
button (11) is pressed, one of the following four types of operation modes will appear on the
LCD display. The operation modes are sequenced in the direction of arrow. During Timer
operation, the Indicator on the air conditioner will light up.
Note
: After power is off (when the unit is in timer mode), the air conditioner will automatically
switched to stand-by mode and the timer operation will be cancelled. To resume the Timer
operation, please follow the above instructions.
8
