Operation instructions
Turning on
SWING , SMART , SUPER , QUIET, TIMER , ECONOMY , IFEEL , DIMMER , CLOCK ,
and 8
℃
HEAT
operation modes will
be specified in the following pages.
SLEEP
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
Wait 3 minutes before restarting the appliance.
During heating operation, air flow is not discharged at the beginning. After 2
－
5 minutes, the air flow will be discharged
until temperature of indoor heat exchanger rises.
4
Press button
.
T
he RUN indicator of the indoor unit lights up.
Result :
Vertical airflow(Horizontal airflow) is automatically adjusted to a certain angle in accordance with the
operation mode after turning on the unit.
The direction of airflow can be also adjusted to your own requirement by pressing the "
" buttons of
the remote controller.
Operation mode
Direction of airflow
COOLING, DRY
*HEATING,
FAN ONLY
horizontal
downward
Using remote controller to set various angles of flow or specific angle as you like.
*Heating mode is only available for heat pump models.
Airflow direction control
Press " " button once.
Press " " button again .
The louvers swing to a suitable angle as desired.
The vertical adjustment louver will swing up and down automatically.
Result :
Result :
Vertical airflow control (with the remote controller)
Using remote controller to set various angles of flow or specific angle as you like.
Press " " button once.
The horizontal adjustment louver will swing left and right automatically.
Result :
Horizontal airflow control (with the remote controller)
PRESS
PRESS
PRESS
PRESS
PRESS
