Airwell K 12 OG LN, Installation And Maintenance Manual

Page: 7 / 46

5
SEE APPENDIX
5. DIMENSIONS
6. HANDLING
6.1. NET WEIGHT
The apparatus should be handled with care as any potential impacts might damage the balance of the fan/motor
assembly. It is recommended to place the apparatus as near as possible to the final installation site before unpacking.
Avoid placing heavy tools or weights on top of the packed apparatus.
The sharp edges and surfaces of the coils can cause injury. Avoid contact with them.
Do not lift the apparatus by the condensate drainage outlet or the water connection
points.
MODELS
9 12 18
2P 4P 2P 4P 2P 4P
WEIGHTS (kg) 26 27 28 29
7. ELECTRIC SPECIFICATIONS
Models
9 2P 12 2P 18 2P
with
heating
without
heating
with
heating
without
heating
with
heating
without
heating
Nominal current
A 6.7 0.3 8 0.3 10.8 0.4
Fuse rating gG
A 10 1 ** 10 1 ** 16 1 **
Fuse rating ASE / VDE
A 16 2 16 2 16 2
Power supply
230V 50Hz 230V 50Hz 230V 50Hz 230V 50Hz 230V 50Hz 230V 50Hz
Cable section mini*
mm² 3G1.5 3G1 3G2.5 3G1 3G2.5 3G1
Electric heating capacity
W 1500 1800 2400
Models
9 4P 12 4P 18 4P
Nominal current
A 0.3 0.3 0.4
Fuse rating aM **
A 1 1 1
Fuse rating ASE / VDE
A 2 2 2
Power supply
230V 50Hz 230V 50Hz 230V 50Hz
Cable section mini*
mm² 3G1 3G1 3G1
IMPORTANT
* These datas are given for guidance only. They must be checked aat commissioning according to prevailing
standards. They depend on the installation and the cables used.
A main fuse must mandatorily be provided on the power supply.
² Fuses not supplied
² Cables not supplied
** aM or C curve trip switch
1 thermostat for each cassette or installation with the 7ACEL1207 kit for a MAXIMUM of 4
Cassettes.