Airwell DC Inverter GCLDCI30RC, Programming & Operation Manual

Page: 7 / 14

5
ON- UNIT OPERATION
If the air-conditioner cannot be operated by the Remote Control unit,
it can be turned on for cooling or heating, or completely turned off,
by pressing MODE button (H) on the air-conditioner. The MODE
button will change the operating status of the unit between-
COOLING-HEATING-STAND-BY positions, every time it is pressed,
Indicators (G), (I) or (A) will light up respecitively, to indicate in which
mode the air-conditioner operates.
ON-UNIT INDICATORS AND CONTROLS
MODE
COOL
SAFTY SW
HEAT
RESET
A. Stand-by/Operation indicator
B. ESF/Ionizer indicator
C. LCD operation display
D. Signal receiver
E. Timer indicator
F. Filter indicator
G. Cooling indicator
H. Unit mode button
. Heating indicator
J. Electrostatic filter safety button
K. Reset button
L. Ionizer indicator
M. Ionizer on/off
Lights up in red when
connected to power.
Lights up in green during
operation.
Lights up when the E.S.F
or Ionizer operation.
Receiver signals from the
remote control.
Lights up during timer and
sleep operation.
Lights up when air filter requires
cleaning.
Lights up only when mode
(H) is pressed.
Used to switch the unit off or turn
it on for cooling or heating without
the remote control.
Lights up when mode (H) is
pressed.
Turn off the Electrostatic filter
when you open the grill.
Press to turn off the filter
indicator and to reset the
filter function, after the cleaned
filter has been reinstalled.
Press to cancel the buzzer
announcer.
Lights up during the ionizer is
open.
Used to switch the ionizer on or off.