OPERATION
OPERATION
C) HOW TO SET A PROGRAM FOR DAILY ON/OFF OPERATION
1. Press the TIMER OFF button to select the desired timer.
2. Press the TIMER OFF button till the ON sign blinks.
3. Press the + or - button until the desired value is displayed.
4. Press the TIMER OFF button again, the OFF sign blinks.
5. Press the + or - button until the desired value is displayed.
6. Press the TIMER OFF button to activate the timer.
P
ress
button to
activate the supply aire flap to auto swing, if you push this button
again, the flap stops immediately.
Set vertical vanes to the front position during COOLING/DRY operation if humidity is
high.
If the vertical vanes are set to the left-most or right-most position, condensation may
form around the air outlet and drip off.
Do
not
move
the
flap
with
your
hands
when
the air
conditioner
is
running
.
Use
the
button
on
the
remote
control
to adjust
the
position
of
the
flap
.
If
you
move
the flap
by
hand
,
the
factual
flap
position
and
the flap position
on
the
remote
control
may
no
longer match
.
If
this
should
happen
,
shut
off
the
unit
,
wait
for
the
flap
to
close
,
and
then
turn
on
the unit
again
;
the
flap
position
will
now
be
normal again
.
NOTES
Some functions of remote controller will not be available when the unit does not
support them!
By resetting the remote control, shall totally remove the battery
for 10 seconds.By pressing the " " and " " together to switch the temperature
display between degrees Celsius and degrees Fahrenheit at power off status.
ADJUSTING THE AIR FLOW DIRECTION
Press
and CLEAN button together to activate the horizontal louver. If you push
them together again to stop it immediately.(
Only for selected models
)
24
25
