background image

OPERATING INSTRUCTIONS 

 

 

Safety guidelines 

 

Please read the safety guidelines and operating instructions closely before using the 

machine. 

 

 
-  Turn off the machine and disconnect power before opening the machine or performing 

any repair or maintenance work on the machine. 

- Switch off the machine if it will not be used for an extended period of time. 
- Do not insert any objects into the machine when it is connected to power. 
- To prevent the risk of electric shock, ensure that the machine does not come into contact 

with liquids. 

 

 

 

- Do not operate the machine without the covers for the machine components. 

- Keep hair and loose clothing away from the film feed mechanism. 

- Place the machine only on surfaces that are adequately large, stable, flat, and horizontal. 

 

This machine is designed for safe operation in compliance with the use, instructions, and 

guidelines specified in this operating instruction. 

 

All persons who use this machine must be familiar with the content of these operating 

instructions and must carefully follow the safety guidelines.  

 

AirWave shall not be responsible for damage resulting from improper use of the machine 

or non-observance of the safety guidelines. 

 

 

 

 

 

 

 

 

 

Summary of Contents for Air Boy nano4





















Reviews: