Airvent External PLUG & GO Run On Timer Owner'S Manual Download Page 4

Page: 4 / 4

1.This unit requires a 4 Pin socket for

installation, we recommend using HPM

or Clipsal 4Pin Socket.

2.Ensure the 4 Pin outlet is wired in the

same way as illustrated below before

turning on power.

1.Plug in the 4 Pin Plug to the

appropriate 4 Pin Outlet.

2.Plug in the 3 Pin Plug to the external

Run-On-Timer junction box

3.Set the desired time for the

Run-On-Timer

Please ensure colour code is followed when wiring, incorrect wiring will result in damaged ROT

PCB Board and will void warranty.

WARNING

Installation Guide

BEFORE STARTING

INSTALLATION METHOD

Summary of Contents for External PLUG & GO Run On Timer

Page 1: ...other than those recommended or at voltages other than indicated will also void this warranty For warranty issues contact the place of purchase for repair replacement opportunities The original date r...

Page 2: ...ternal Run On Timer to facilitate future maintenance and ensure that the unit is adequately supported This product is not intended for use by persons including children with reduced physical sensory o...

Page 3: ...Recommended Connection Clipsal or HPM 4P plug Constant Active Light Neutral Earth Switched Active...

Page 4: ...e turning on power 1 Plug in the 4 Pin Plug to the appropriate 4 Pin Outlet 2 Plug in the 3 Pin Plug to the external Run On Timer junction box 3 Set the desired time for the Run On Timer Please ensure...