- 2 -
FLIGHT MODE 4 >22 >or >--
GEAR
>-- >or >--
Throttle Cut
>34 > or >--
Flap
1
>11 >or >--
Flap
2
>22> or >--
EL > FL
>10 >or >--
FL > EL
>22 >or >--
C-MIX
1
>23 >or >--
C-MIX
2
>23 >or >--
C-MIX
3
>22 >or >--
C-MIX
4
>22 >or >--
C-MIX 5 >--- >or > --
Press the
END
key twice.
NOTE:
Turn
OFF
each Flight Mode switch after completion of programming each function and Mix.
All values show are trial values. Fine tune after completion of programming your setup.
FLIGHT MODE 1—Takeoff with Flaps in Down Position
Select
SURFACE
using the Navigation Pad. Press
ENTER
Turn ON Flight Mode 1 Switch (#11)
Press Navigation Pad Down arrow and select
EPA.
Scroll to the right and select the
LF
Use the YES/+ key to input a value of
50%.
Do the same for the
RF.
The screen will show
1 50%
indicating that
FLAP 1
is used for this function. Note that polarity
determines the direction of servo throw and value the amount........... Press
END
key twice.
FLIGHT MODE 2 --- Elevator to Flap Mixing
Select
F-MODE
. Press
ENTER
Turn ON Flight Mode 2 Switch (#10)
Scroll down to MIXING. Press
ENTER
Scroll down to
EL > FL.
Press
ENTER
Use the Navigation Pad and the YES/+ and NO/- keys to make it read:
F-MODE (2)
COMMON >SEP
EL >LF > 20%
EL >RF > 20%
Press the
END
Key twice.
Summary of Contents for SD-10G Aero
Page 5: ......
