Getting the SS-300-AT-C-55-E Online
Step 1:
Attach the antennas to the device
You must affix the external antennas to the device for proper functioning. The device
does not work without the external antennas.
Step 2:
Power up the device
If using PoE, plug one end of the Ethernet cable into the PoE switch or injector and plug
the other end into the Ethernet port on the SS-300-AT-C-55-E. Ensure that the PoE source
is turned ON.
As an alternative to PoE, insert the power adapter plug into an AC power outlet and the
other end into the power input port on the SS-300-AT-C-55-E.
Warning:
If you are using AC power to power up the device, ensure that you only use
the AC power adapter that is shipped as part of the SS-300-AT-C-55-E package.
Step 3:
Connect device to the network
If you are using PoE, then the SS-300-AT-C-55-E should already be connected to your
network. If you are not using PoE, then plug one end of the Ethernet cable into an Ethernet
jack on your network and the other end into the Ethernet port on the SS-300-AT-C-55-E.
Step 4:
Check the LED status
Wait for a few minutes till the
three LEDs for Wi-Fi, Ethernet, and
Power turn GREEN indicating that
the SS-300-AT-C-55-E is online
and operational.
Wi-Fi
Ethernet
Power
