5. The “
POWER
” LED will light up indicating that the unit is now powered
up and ready for operation.
6. In order to display the video from Air 7415B, you may need to change
the settings on your television set so that its input matches to the
television’s physical connection to the Set-Top Box.
When you press the “
POWER
” button on your remote control, the
Air 7415B will go to standby mode.
If you are facing any problems with your device please contact your
Service Provider.
You can setup your
Air 7415B
quickly and easily by following the steps
below:
1. Place the batteries provided into the remote controller as shown inside
the battery room.
2. Connect the audio/video outputs of the Air 7415B to the audio/video
inputs of your television using
HDMI
cable provided with the product.
UHD video resolutions are only possible through the TV's HDMI ports
supporting UHD and HDCP2.2.
3. Connect the Ethernet cable provided with the product to Air 7415B.
4. Connect the power adapter provided to the wall outlet and connect
the other end to your Air 7415B.
Please refer to the safety instructions included in the product box.
Ethernet
S/PDIF
A/V Out
MODEM
Air 7415B
Reset
WIFI
12V
ETHERNET
4
ADSL
3
2
1
On/Off
INTERNET
3
SETUP
2
