Setup
You can setup your
Air 7405
quickly and easily by following the steps below:
1. Place the batteries provided into the remote controller as shown inside the
battery room.
2. Connect the audio/video outputs of the Air 7405 to the audio/video inputs of
your television using either
3.5 mm Jack to SCART
or
HDMI
cable provided with
the product. If your television has an
HDMI
video input, it would be best to use
it since HDMI video output provides higher visual quality. High resolution video is
only possible through the
HDMI
output.
3. Connect the Ethernet cable provided with the product to Air 7405.
Note:
If your unit is wireless, in other words if it works without the Ethernet cable,
please go to the “Setting up a wireless connection” section.
4. Connect the power adaptor provided to the wall outlet and connect the other
end to your Air 7405.
5. On power up, it is possible that the device would check the network and upgrade
Power LED
would alternately
6. The “
POWER
” LED will light up indicating that the unit is now powered up and
ready for operation.
7. In order to display the video from Air 7405, you may need to change the settings
on your television set so that its input matches to the television’s
physical connection to the set-top box.
You should be able to select
Menu
options using your remote control.
POWER
” button on your remote control, the Air 7405 will go
to standby mode.
For more information, please refer to section titled “
Using Your Air 7405
”.
If you are facing any problems with your device please contact your Internet Service
Provider.
