【
Installation
】
A single gang electrical box (Box) soul be reserved when mounted on the wall, in order to get enough space for the device cable,
can be mounted horizontally or vertically.
With hot-swappable design, PLUGI-IN terminals for easy adjustment test.
Recommended AWG22 four core shielded cable, and EMT pipe configuration in order to achieve better communication results.
Use computer software to perform BACsoft. Use USB2.0 and Mini USB conversion cable to link MFT28U with Mini USB port (Figure
3) to set the data, update firmware and download the graphic control interface data
Installations needed to avoid dust, condensation, and other environmental factors, damage to the product.
Connect in accord to
diagram
22AWG
Twisted pair
shield cable
MODBUS
Mini
USB
12VDC
M+ M-
V+ V-
BL Y
R G
Fig-1 Installation diagram
Fig-2 Dismount diagram
Fig-3 Connection
【
Network Architecture
】
【
Dimensions
】
Unit
：
mm
Please refer to
http://www.airtekgroup.com
for the most resent update information.
