(11)
–
Air purification unit
–
Dif-Pur
Then, release the 2 fixing screws of the motor
bracket on each side on the outside of the
housing, as shown in the image below. Each
motor bracket is fixed with 4 screws.
Caution is a must since as once the 4 screws
between the motor bracket and the housing are
removed, the motor will only be supported by its
own hose cable.
The next step is to remove the drive fence and
absolute filter as set out in the previous points.
Before separating the fan from the bracket, the
cables must be disconnected from the junction
boxes (both power and dimming).
Disconnect the single-phase hose from the white
box and the adjustment hose from the same
box.
Finally, access inside the equipment at the
bottom and remove the 6 screws that secure the
motor to the motor mount.
To mount the new fan, follow the process in
reverse order.
