36
HydroOne
HydroFlex
0 - 20°
HydroFlex S
HydroFlex PA
HydroOne
SmartSens
0 - 20°
HydroFlex installation angle
Min. recommended installation distance at 18-20°C ≤ 65 %RH
Spray area
Spray area
5.12 Sensor
Positioning of the sensor, is a main premiss for a stable and correct control
•
Position height so that it is unreachable from the floor
•
The location should represent average room temperature / humidity conditions
•
Position the sensor according to layout drawings according to order confirmation
•
Check that the ambient conditions match the data in order confirmation, provided by the customer.
•
Do not position the sensor:
- In direct airstream from air inlet
- In direct contact with atomized water before evaporation
- In direct cold / hot airstream from machinery, door openings ect.
201218
