32
ITA-6 rev.02
Supply:
- 115/230 VAC (- 18%, + 8%), 50/60 Hz, overload and overvolt-
age protection fuse F6-1A fast blow.
- 12 VDC for AC back-up supply, can activate the inlet and alarm if sup-
plied with DC back-up voltage.
Power unit:
50/60 Hz, 30 VDC, 5A motor output, fuse F1-5A slow blow.
Alarm:
ON-OFFoutput, 115/230 VAC, 50/60 Hz, 30 VDC, 3A, fuse F4-3A
slow blow.
Probes:
Low voltage ( < 5V), isolated from the supply. Operating range:
-40.0° to 120.0°F(-40.0° to 49°C). Accuracy: 1.8
o
F (1°C) between 41
o
and 95
o
F (5° and 35°C).
Enclosure:
ABS, humidity and dust-tight.
TECHNICAL SPECIFICATIONS
The room temperature where the controller is located MUST
ALWAYS REMAIN BETWEEN 32
o
AND 104
o
F (0
o
AND 40
o
C).
For indoor use.
5
ITA-6 rev.02
LOCATION OF THE CONTROLS
Status Leds
ADJUSTMENT
KNOB
PUSH-BUTTON
STATUS LEDS
FUNCTION
SELECTOR
LED
MEAN IN G
CLOSE / OPEN
Turns on when the c ontroller opens the air inlet panel.
Flashes when the c ontroller c loses the air inlet panel.
INLET RESET
Turns on when the position of the air inlet is being res et.
% / SECONDS
Turns on when the value on screen is dis play ed in sec onds .
Flashes when the value on screen is a percentage.
ADJUST OPENING
Turns on when the c ontroller waits for the us er
to adjust the opening of the air inlet.
CALIBRATION
Turns on when the c ontroller is in c alibration mode.
LOCKED
Turns on when the parameters are loc ked
and c annot be m odified.
°C / °F
Turns on when a tem perature value is displayed in Fahrenheit.
Flashes when a tem perature value is displayed in Celsius.
ALARM
Turns on when an alarm is detected.
