E
E - 6
INTERIOR
Replace the battery when this condition occurs. USE ONLY THE FOLLOWING 9
VOLT BATTERIES FOR CO DETECTOR REPLACEMENT.
Alkaline type: EVEREADY522; DURACELL MN1604; GOLD PEAK 1604A
Lithium type: ULTRALIFE U9VL
NOTE: REGULAR TESTING IS RECOMMENDED.
WARNING: USE ONLY THE BATTERIES SPECIFIED. USE OF DIFFERENT
BATTERIES MAY HAVE A DETRIMENTAL EFFECT ON THE CO DETECTOR.
CLEANING YOUR DETECTOR:
To clean your detector remove it from the mounting bracket as outlined in the
beginning of this section.
You can clean the interior of your detector by using your vacuum cleaner hose
and vacuuming through the openings around the perimeter of the detector. The
outside can be wiped with a damp cloth.
AFTER CLEANING, REINSTALL YOUR DETECTOR. TEST YOUR DETECTOR BY
USING THE TEST BUTTON.
Test detector weekly for proper operation by pushing the test button until the
YELLOW L.E.D. lights and a short beep is heard (approximately three seconds).
Release the button. The detector will then test itself for proper operation. At
completion of the self-test, the alarm will sound and both L.E.D.s will light for 3/4
of a second. The detector then resumes normal operation.
SERVICE AND WARRANTY
If after reviewing this manual you feel that your CO Detector is defective in any
way, do not tamper with the unit. Return it for servicing to: Quantum Group, Inc.,
11211 Sorrento Valley Road, Suite Valley Road, Suite V. San Diego, CA 92121.
Or call us toll free (800) 432-5599
E-mail address: [email protected]
