background image

B

TOWING YOUR AIRSTREAM

B - 5

HITCHING UP

Hitching  up  your  trailer  is  something  that  will  become  almost  second  nature  with 

practice. The following section includes proper hitch load distribution. Proper training 

on connecting your trailer to a tow vehicle is essential for safety. Please see your dealer 

or other qualified personnel for instruction on the proper hitching of your trailer.

Equalizing Hitch Load Distribution 

When  a  trailer  is  hitched  up  properly  to  a  tow  vehicle  with  a  load  equalizing  hitch, 

approximately 1/3 of the trailer’s tongue weight will be on the trailer’s axles and 2/3 will 

be transferred to the tow vehicle, 1/3 of this weight transfer will be carried by the front 

wheels and 1/3 by the rear wheels of the tow vehicle (See diagram), Thus, the tire load 

of each wheel on the tow vehicle will be increased by 1/6 of the trailer’s tongue weight. 

The tire air pressure of the tow vehicle should be increased to compensate for this 

additional weight. Refer to the vehicle’s owner’s manual for this information. 

WARNING

:  The  tongue  weight  should  he  approximately  10%  of  the 

trailer’s total weight, but MUST NOT EXCEED 1,000 lbs. And, under no condition 

should it exceed the hitch rating. Your hitch installer should provide your hitch 

rating information. 

Sway Control Device 

Although Airstream has not intruded into the hitch manufacturers field of expertise 

and  performed  formal  testing,  we  find  the  vast  majority  of  Airstream  owner’s  pur-

chases sway-control devices. 

When passed by large trucks or when exposed to sudden crosswinds the trailer will be 

“pushed” and this action will be felt in the tow vehicle. It’s our understanding the sway 

control devices will reduce the amount of movement and make towing more comfort-

able  and  add  some  safety.  Follow  the  directions  of  the  sway  control  manufacturer 

when having it installed and using it. 

Percentage of Tongue Load 

distributed to car and or trailer wheels

Summary of Contents for 2007 Safari




































































































Reviews: