background image

En-5

4

Press the “

” button or “

” button to set the time in 10-minute increments.

* Hold down the “

” button or “

” button to adjust the time quickly.

5

Decrement Increment

● 

Operating setting

Raise

Lower

Press the “

” button, the “

” button, the “

” button or “

” button to set

the operation.

* For the operations that can be set, refer to “Operation mode setting”, “Room tem-

perature setting” and “To start/stop operation” (page 4), in “OPERATION”.

* Only the current operation settings are displayed.

ex. TIMER-1 will start operation at 8:00 on COOL.

6

● 

Setting the next timer for the same day:

TIMER-1

TIMER-2

TIMER-3

TIMER-4

Then press the “

 ENTER” button to proceed to the time setting, and repeat steps from 

4

 to 

5

.

 Repeat steps 

3

 to 

5

 to set the timer for another day of the week.

Be careful for pressing the “

 ENTER” button without any operation setting because the time that is set will be

cancelled.

● 

Timer setting

AM

3

● 

Day of the week setting

DAY

 S          M          T          W         T         F         S

ALL

(SUN)

(MON)

(TUE)

(WED)

(THU)

(FRI)

(SAT)

Press the “

 DAY” button to select the day of the week.

* When select ALL, all of the days will be selected.

WEEKLY TIMER

Instructions related to heating are applicable to “HEAT PUMP MODELS” and “HEAT RECOVERY MODELS” only.
The timer function is not available depending on the initial setting.

• Different schedules can be set for each day of the week.
• 4 timers can be set for each day.
• Operation on/off time, operation mode, and temperature can be specified for each timer.

Press the “

 PROGRAM/ 

 CLOCK

ADJUST” button.
* Do not press this button for 2 sec-

onds or more, otherwise you will en-
ter the time setting mode.

2

Press the “

” button to select the indoor unit.

* If all indoor units are selected, the times for all of the registered indoor unit

timers are set at once.

1

CLOCK ADJUST

To set the WEEKLY timer

All indoor units

In case operating mode is not set, the temperature range can be set from 18 °C to 30 °C.
Accordingly, it cannot be set from 10 °C to 17 °C.

9374708031-06_OM_en.p65

20/11/2012, 11:40 AM

5

Summary of Contents for UTY-CGGG










Reviews: