En-2
PREPARATORY OPERATION
To set the operation mode
OPERATION
Instructions related to heating are applicable to “HEAT PUMP MODELS” and “HEAT RECOVERY MODELS” only.
To start/stop operation
CLOCK ADJUST
Press the TIMER MODE button for 2
seconds or more. The time display on
the remote controller will flash.
2
DAY OFF
DAY
SU MO TU WE TH FR SA
Press the DAY button and select the current day.
A
appears around the selected day.
Press the SET TIME buttons to set the current time.
Press repeatedly to adjust the current time in 1-minute increments. Press and
hold to adjust the current time in 10-minute increments.
ex. Monday 10:00
Press again to end.
CLOCK ADJUST
SU MO TU WE TH FR SA
1
3
4
Temperature setting range
AUTO ............................................................ 18 to 30 °C
COOL/DRY .................................................... 18 to 30 °C
HEAT ............................................................. 10, 12, 14, or 16 to 30 °C*
Lower
Raise
Operation lamp
Air conditioner ON: Lit brightly
Air conditioner OFF: Not lit
Press the START/STOP button.
Press the MASTER CONTROL button to set the operation mode.
If DRY is selected, the fan speed will be set to AUTO.
Press the SET TEMPERATURE buttons to set the room temperature.
Press the FAN CONTROL button to set the fan speed.
To set the current day and time
* Room temperatures as low as 10, 12, and 14 °C cannot be set depending on the
model.
●
Operation mode setting
●
Room temperature setting
●
Fan speed setting
* AUTO and FAN cannot be selected for “HEAT PUMP MODELS.”
ENERGY
SAVE
Press the ENERGY SAVE button to start or stop the energy-
saving air conditioner operation.
* The energy save air conditioner operation is not available
depending on the model.
●
Energy save setting
AUTO
COOL
DRY
FAN
HEAT
AUTO
HIGH
MED
LOW
