8
Therapy Belt Positioning and Adjustment
Position the therapy belt’s electrodes on the area of the back to be treated.
If the back ache is at waist level; the pain is in the upper treatment area.
Position the belt so that the middle of the belt is at waist level.
If the back pain is in the lower treatment area, position the belt so that the
middle of the belt sits approximately 1 to 2 inches (2.5 to 5 cm) below the
waist. See Figure 3.
When the belt has been manoeuvred into the correct position, bring the two ends
of the neoprene straps together and fasten with the built-in hook and loop pads.
The belt may be tightened or loosened as shown by adjusting the hook and
loop fasteners (See Figure 4).
FIGURE 4. Adjustment of Belt Size
FIGURE 3: Therapy Belt positioning and adjustment
.
Quick Refe rence Guide / Bel t
.
Quick Refe rence Guide / Bel t
.
Quick Refe rence Guide / Bel t
Hook and Loop Fasteners
