9
LifeLine
®
Kärdio Blood Pressure Monitor
User Selection
This monitor allows for the independent monitoring and recording of blood
pressure readings for 2 individuals in 2 different memory zones.
• To select the user or memory zone, ensure the monitor is off. Press
and hold the TIME button until the user icon begins to blink. Press the
MEMORY button to change the User and then confirm the selection by
pressing the START / STOP button. The monitor will then switch off and
remain at this selected User.
Setting the Time and Date
Once new batteries are installed, the clock shows TIME “12:00” and “DATE”
1-01. The current time and date can then be entered as follows.
1. When the unit is off, press and hold the TIME button until the user icon
begins to blink. Press the TIME button again to display the year. Press the
MEMORY button to increase the year. Press the TIME button to confirm
the year.
2. The display now switches to the Date. The first character (month) will
blink. Press the MEMORY button to increase the month. Press the TIME
button to confirm the entry.
3. The last two characters (days) will now blink. Press the MEMORY button
to increase the day of the month. Press the TIME button to confirm the
entry.
4. The display now switches to set the time. The first character (Hour) will
blink. Enter the hour by pressing the MEMORY button. Press the TIME
button to confirm the entry.
5. The last two characters (Minutes) now blink. Press the MEMORY button
to increase the minutes. Press the TIME button to confirm the minutes.
6. A set of vertical “0” images now appears indicating mmHg units (the
preferred unit for measuring blood pressure in Australia). Press the TIME
button to confirm this selection. If two sets of “0.0” images appear you
have selected kPa units. Change the units by pressing the MEMORY
button and then confirm the correct selection with the TIME button.
7. The settings are now confirmed and the clock starts.
