E val u at ing L in k Qu al ity
C o m m i ssi o n i n g M an u al
3.
4.
5.
In the
Number of Sweeps
group, select the option for scanning the frequency
range:
Single:
scans the spectrum only once
Continuous:
cyclically scans the spectrum (i.e. repetitively)
Custom:
you can define the number of sweeps (range is 0 through 1,000
sweeps)
To change the antenna gain, in the
Antenna Gain
field, enter the antenna gain.
If you want to restore the BSR’s default antenna gain, click the
True Antenna
Gain Value
button.
To define the frequency range for which you want to analyze, define the
following fields:
Start Freq:
frequency from where you want to scan (i.e. lower frequency)
Stop Freq:
frequency to where you want to scan (i.e. upper frequency)
28.3.1.3. Starting the Spectrum Analyzer
To start and stop the Spectrum Analyzer, click the
Start
and
Stop
buttons (located below the graph), respectively.
28-8
Airspan Networks Inc.
01040311-07
