AirStrand 2200 Installation Guide
AirStrand 2200 – Installation Guide
© Copyright Airspan Networks Ltd., 2021
P/N:
DUG01287
Rev. A2, Oct 2021
19
4.1.1
Hanger Bracket Assembly on the AirStrand 2200
The following is in the event that the Hanger bracket is not assembled.
1.
Assemble both strand brackets to the sides of the unit. Inserting the 1/4-28 Hex screws
(provided) into the threaded holes.
Figure 3: Assemble Strand Hangers on Unit
2.
Orient the AirStrand 2200 unit to enable optimal positioning prior to placing on strand
cable.
3.
Lift and hang the AirStrand unit onto the cable strand, keep a hand on the unit for safety.
Figure 4: Hanger and Clamp Assembly
4.
Assemble the hanger clamps onto the hangers, the cable diameter must be from 6 to 8mm
(1/4 to 5/6 in.).
