Rad
io
u
se
in
st
ru
ct
io
ns
1
When the machine is used as a radio, it is of paramount
importance to place the machine and the external antenna
correctly. Otherwise, you may not receive any radio programs,
or only receive bad one! It is recommended to use the machine
close to window as much as possible. If it is impossible to use
the machine near the window, a group of external antennas will
be of great importance. The more professional the antenna and
antenna installation, the better the machine performance. In
addition, in case of connection with external antenna or not, it
should also be noted that the switch position for “internal/
external” antenna on the back of the machine must be correct!
Listen to FM broadcasting
This machine has equipped with built-in FM line. If the radio is placed
close to the window in the general urban area (not far from the radio
transmitting station), there is no need to use external antenna
generally. When external antenna (random accessory) is used, turn the
rear
③
(Figure 1) to the external (EXTERNAL) position. The external
antenna of this machine can also be connected with dedicated external
antenna or dedicated cable antenna. Press the (Figure 2)
⑯
key switch
on the front of the machine to be in FM wave, and adjust the tuning
knob to the range of 87--108MHZ for its radio programs. Turn the
transfer switch (Figure 2)
⑫
to FM position to be in ordinary FM state.
Turn to FM St position to be in stereo FM state. If the FM St effect is
not good enough, the switch can get a higher Signal to Noise Ratio
(SNR) at FM
