Page 1 of 2
70
– A Aleph Dr.
Newark, DE 19702
Support Email:
Toll Free Number: 1-800-AIRSLED (1-800-247-7553)
USING AIRSLEDS SUB-ZERO
®
ADAPTERS
Airsled’s Sub-Zero
®
adapters are designed to ensure that the air beams safely lift a Sub-Zero
®
refrigerator
by the appropriate, structural contact points. Follow the below procedure when using this accessory:
•
Prepare the work environment by ensuing objects on, inside or near the refrigerator are removed
and/or secured.
•
Remove any bendable or breakable features at the base such as front grill cover and drip pan.
•
Confirm that there are no other breakable components hanging down that could prevent the adapters
from making co
ntact at the desired points of the refrigerator’s base.
•
Slide the Airsled air beams under the refrigerator.
•
Remove the rear metal pins and wood block and place the metal rails sideways on the air beams and
then rotate so they are both are upright. See figure 1. This is done before sliding on the wood block
supports.
•
With the rails upright, slide the wooden blocks into the desired slot. There are two slots. One is for a 3
¼” height and the other is for a 3 ½” height. Select your desired slot. See figure 2.
•
Insert the rear pins back into the rails. See figure 3.
•
Ideally, the gap between the adapters and the refrigerator
’s base will be uniform. This will minimize
possible tilting during load movement. The
adapters’ front supports may need to be adjusted to
correct any variance between the front and rear gap. See figure 4.
Figure 1 (top view)
Figure 2
Figure 3
Figure 4 (adjustable front
support)
