Page
2
Step 1: Hardware Installation
You need to set up your camera using a network cable (wired) first before you attempt to use it wirelessly.
1. Install the Wi-Fi antenna.
2. Plug the power adaptor into the camera and into an AC outlet.
3. Plug one end of the network cable into the camera, and the other end into your router/switch.
Step 2: Software Installation
Install the following software:
1.
IP Camera Tool
: Open the CD, click “
IPCamSetup.exe
”—“
Next
”—“
Next
”—“
Close
”.
2.
ActiveX
: Click “
Appinstall.exe
”—“
Next
”—“
Install
”—“
Finish
”.
After this is done, the icon “IP Camera Tool”
will be displayed on your desktop.
