AirSep Topaz, Instruction Manual

Page: 16 / 94

AirSep
®
Corporation
4-4 Topaz/Topaz+/Topaz Ultra Instruction Manual
Intake Resonator
The intake resonator reduces noise from the air compressor (See Below).
Air Compressor
The air compressor pressurizes ambient air and delivers it to the
adsorbers (See Below).
Cooling Fan
The cooling fan increases airflow inside the enclosure to cool the air
compressor. The models without enclosures do not have a fan installed.
Capacitor
The capacitor stores additional electrical power to enable the air
compressor to start.
Heat Exchanger
The heat exchanger cools the pressurized air from the air compressor.
Adsorbers (Sieve Beds)
The adsorbers, or sieve beds, contain the molecular sieve that adsorbs
(attracts) nitrogen from compressed air and allows oxygen to pass
through as the product gas.
Cycle Pressure Gauge
The cycle pressure gauge indicates the pressure inside the sieve beds.
The cycle pressure gauge does not indicate the
pressure set by the pressure regulator. The oxygen
pressure gauge on the right side of the enclosure
indicates the pressure set by the pressure regulator.
Valve Block
The valve block houses the solenoid valves.
Equalization Valve
The equalization valve balances the pressure between the two sieve
beds.