MUA Filter Pressure Sensor
FPS Installation Guide
The screen should look like this:
If you purchased the standard MUA unit select the “basic-filter.conf”
and press the “submit” button.
If you purchased the Heating Assist Unit select the “attic-filter.config”and press
the “submit” button.
Confirm your choice is loaded properly, see “current config”
And click return to main page when finished.
In the Main Access Page of the MUA interface you should now have a pressure
reading for the “filter Pressure”. If the reading is negative but you prefer a positive
reverse the filter tubing at the control box.
3
