background image

5

Never move the product

whilst it is switched on.

Always turn it off and allow 

it to cool down before

touching.

WARNING

Do not use the unit other than for

its intended use. (do not use for

drying clothing or for keeping

animals or plants warm etc.)

Do not use the product

whilst sleeping or away

from the premises.

The safety grille does not

protect children or frail

people completely.

(use under strict supervision)

Never use the unit in places

such as bathrooms, shower

rooms, near swimming pools

or anywhere near water.

(electrocution and / or electric

 leakage can easily occur)

AH-720

Do not place the heater 

close to the electric socket

(risk of fire)

Never leave the product

switched on if it is covered by

any objects or placed improperly 

as the programmer may

automatically operate the unit

and cause a fire

 

The heater must not be located 

    immediately below a socket outlet.

Do not use this heater in the immediate surroundings of 

    a bath, a shower or a swimming pool.

If the supply cord is damaged, it must be replaced by 

   the manufacturer, its service agent or similarly qualified 

   persons in order to avoid a hazard. 

♣ After reading this, be sure to keep it at a place where other users can refer to it at any time.

Never allow water to get into 

the unit by leaving it exposed 

to the rain or careless cleaning. 

(this could cause fire or electric

 shock) 

Never spray water directly 

onto the unit nor attempt to

clean it with any solvents or

flammable liquids.

(this could cause electric shock

 or fire) 

If the power cord is damaged,

it must be replaced by 

a qualified electrician.

(risk of electric shock or fire)  

DESCRIPTION

 OF USE

Summary of Contents for AH-720





















Reviews: