8. GLOBAL
8.1.
Vol
— Controls the volume level of the device’s output, allowing you to either
attenuate it or boost it by up to 6 decibels.
8.2.
Mix
— Controls the dry/wet mix of the device.
8.3.
Time
— Controls the master time by multiplying each band’s individual delay time
settings by a factor of 0.125 to 8.0. This control is exceptionally useful either for
mangling Relapse’s output, or redefining the range of the device’s individual band
delay times. For example, in unsynced mode, band delay times span from 1ms to
1000ms, which can make fine-tuning short delay times a tricky business. But by
setting the master time to x0.125 (1/8th), then the maximum band delay time
becomes 125ms, allowing you far more precision.
8.4.
Master Time Mod Amounts
— Controls the modulation amount of the master
time by Relapse’s Env and LFO generators, as indicated by their color. Turning
them counterclockwise, to the left, creates negative modulation, whereas turning
them clockwise, to the right, creates positive modulation.
Tip: The LFO Mods are active even when their corresponding bands are not,
which e
ff
ectively allows you to have all three LFOs running on a one band setup.
This can be used, for example, to apply di
ff
erent LFO values to the
Time
and
Freq
controls of a single band!
PAGE
!
OF
!
12
15
7.1
7.2
7.3
7.4