Elements T-Delay
Contents
Loading and saving patches
Loading and saving patches in S-Delay is done in the same way as with any other Reason
device. See “Loading patches” and “Saving patches” in the Reason Operation Manual for
further information.
Controls and displays
ENV FOLLOWER
The envelope follower generates a control signal from the device's audio input which can be
applied independently, either positively or negatively, to S-Delay’s primary controls. This signal
can be “smoothed” using the Attack and Release controls.
Amp
—
Controls the amount of envelope modulation applied to the destinations specified by
the individual Envelope Mod Target toggle buttons.
Attack
— Controls the attack of the envelope. Higher settings result in a slower attack,
whereas lower settings are much faster.
Release
— Controls the release or decay of the envelope. Higher settings result in a slower
release, whereas lower settings are much faster.
Envelope Mod Targets
— Located to the right of the three knob controls listed above, these
buttons toggle whether the envelope modulation gets applied to their respective targets. E.g.,
activating the Freq and Res buttons ensures that the envelope modulation gets applied to the
Freq and Res parameters, but not to Width.
DELAY
Welcome!
1
Loading and saving patches
2
Controls and displays
2
Env Follower
2
Delay
2
Global
4
Rear Panel
5
Page of
2
5