3
- Setup and connect BOTH mechanisms and all 3 inflatable parts before you start inflating the
unit.
- After inflation add the three platform covers.
Routine and Yearly Inspections
Routine Inspections
(before every use)
After every setup or operation, before opening the game to the public, the controller or his
nominee
SHALL PERSONALLY CHECK
that the setup of the Spinning Disc Challenge is correct.
We recommend to check for every criteria written below. The person carrying out the check shall
be sufficiently trained or experienced in the check routines that have to be carried out.
Check that:
- Every button is in a working condition on the Control Panel.
- The electrical connection sockets and cables are not chafed nor damaged.
- The Velcro of every cover, bed connection has a good grip and is not weakened, the covers
are not damaged and no accessible parts of the machinery has sharp edges, sharp angles
or rough surfaces
to cause injury, and no openings which can “trap” parts of the body or
clothing.
- There are no tears, rips which could represent a safety hazard on the bed and walls.
- All nuts and bolts are secured and tightened.
- The inflatable bed is securely anchored.
- The discs are securely connected to the mechanism.
The device shall not be made available to the public until any adjustments or repairs judged to
be necessary as a result of this inspection have been completed.
Trial runs
Following the check, the controller shall run one or more trial runs without any members of the
public on it, simulating where possible emergency situations to verify particularly that the control
system and the emergency stop works properly.
Only now are the users allowed to use the game.
Yearly Examination
Besides the regular checks, the Spinning Disc Challenge should be thoroughly examined at
appropriate intervals by a competent person/institute/organization/company.
SOMEONE HOLDS THE
BED STANDING ON THE
MECHANISM, WHILE
ANOTHER PERSON CONNECTS
THE SANDWICH VELCRO.