Page
3
of
6
2HP FAN:
FOR INFLATING THE
CHAMBER BENEATH THE
MOUTH, THUS MOVING IT
1.5HP FANS:
FOR INFLATING THE SLIDE
WEBBING CAM BUCKLE
STRAP FOR FIXING THE
INSTALLED FLEXIBLE HOSE
- Please be aware that this is not a bouncy castle
and should
not be used for bouncing on.
- Do not use the product without the side scrim walls of the mouth.
- Before every play session, just after inflating the slide, please make sure all 4 cam
buckle straps (3 interior and 1 exterior) hold the installed hoses tightly.
- The moving jaw is to be used only for climbing. Do not allow players to jump down
from it.
For more information regarding operating guidelines and rules of play please see our main User
manual, section “20.9 Check-list for operators and attendants” (page 17) supplied with your unit,
and sent in an electronic format together with this file.
Set up:
- After unfolding the unit please connect the fans as follows:
The filler pipe that supplies the air for the movement of the mouth has an extra webbing cam buckle
strap. This is to hold the already installed flexible hose inside the filler pipe.
To access the chamber beneath the mouth, use the zip
highlighted in the picture beside.