background image

 

Version 1.0 22/09/16 

 

 

Page 1 of 4 

HELTER TWIST DOME (LIGHT AND SPEAKER) 

AQ5792 

 

IMPORTANT 

AS OWNER/OPERATOR IT IS YOUR RESPONSIBILITY TO WRITE AND CARRY OUT YOUR OWN 
RISK ASSESSMENTS BEFORE ATTEMPTING TO USE THIS PRODUCT.

 

Site survey: 

 

1. 

Carry out a survey of the area where the ‘Helter Twist Dome’ will be located, and 
check for any overhead/underground cables. It’s important that this is carried out 
to avoid ground anchors penetrating underground services, and the 

‘Helter Twist 

Dome

’ coming into contact with overhead cables when inflated.    

2.  You  should  provide  an  adequate power  supply  to  the fan,  this  should  adhere  to 

your local power regulations.   

3. 

Check wind speed:

 The industry recommends a maximum wind speed of Force 5 

on the Beaufort scale of 28 - 38 kph (19-24 mph). Force 5 is a fresh breeze when 
small trees in leaf begin to sway

.

 

 

 
 

Summary of Contents for HELTER TWIST DOME (LIGHT AND SPEAKER)

Page 1: ...check for any overhead underground cables It s important that this is carried out to avoid ground anchors penetrating underground services and the Helter Twist Dome coming into contact with overhead cables when inflated 2 You should provide an adequate power supply to the fan this should adhere to your local power regulations 3 Check wind speed The industry recommends a maximum wind speed of Force...

Page 2: ...er manual handling training and use the correct equipment to move the inflatable x2 Set up The first step is to unfold the unit according described in the Land Manual IMPORTANT The electrical Items that you choose to use in your inflatable must meet the safety standards of the country you are operating in You must ensure all items are CE marked The disco light that you will buy separately for the ...

Page 3: ...he clear part facing down After it is placed it needs to be plugged in fig 3a fig 3b After the light is inserted in the corresponding place and plugged in the unit can be inflated The disco speaker will be inserted in the unit after the unit is totally inflated fig 4 Fig 4 The disco speaker shown in this instruction manual is for illustrative purposes only fig 1 ...

Page 4: ...ir pressure will prevent ingress of water into the unit but it cannot be guaranteed to stop all water reaching the electrical parts Therefore we do not recommend operating the unit in the rain When the unit is deflated the light and speaker should be removed as soon as possible and stored safely The wiring harness should be left in place and the unit should be rolled to prevent water lying on the ...

Reviews: