Page
2
of
3
Lights:
The disco lights that you buy will be installed after the unit is unfolded, but in an uninflated state.
Always read the instruction manual you receive with your lights before installing it into the unit.
The light holding chamber can be reached through a zip on top of the unit.
- Search for the zip covered with a Velcro flap
on the top of the unit.
- Unzip both zips (exterior and interior) and
insert the light in the clear PVC pocket.
- Please make sure to close both zips. This way
the cable won’t be able to unplug itself when
the unit is getting inflated.
Speaker:
The disco speaker will be installed in the unit, after the unit is totally inflated. It should be placed as
seen in the figure below and secured with the straps.
TIGHTEN BOTH WEBBING
CAM BUCKLE STRAPS
RAIN COVER
